How can you see the advantages of hot dip galvanizing?

The widely used material in the industry is steel, which can be used to varying degrees in different environments. It is understood that the world's steel lost due to corrosion reaches 1/3 of the total output. To reduce the amount of steel corrosion, it is necessary to have anti-corrosion measures to ensure the normal use of steel, extend its service life, or compare hot dip galvanizing. Has an effect.

At present, the effective method for preventing steel corrosion is galvanizing, pickling steel parts, removing iron oxide on the surface of steel parts, mixing with ammonium chloride or zinc chloride solution, cleaning the steel parts, and then plating. Zinc, that is, the rust-removed steel is immersed in the molten zinc liquid to form a zinc alloy coating on the surface of the steel workpiece to achieve the purpose of anti-corrosion. Compared with ordinary steel, the galvanized steel is not only more sleek and brighter, but also performs well in terms of corrosion resistance and wear resistance. Nowadays, I like the hot dip galvanizing products very much. The hot dip galvanizing market has developed very well, and the more galvanizing manufacturers.

Why choose galvanizing? Is there any other anti-corrosion method? In fact, compared with other methods, the advantages of galvanizing are more obvious. The entire surface of the galvanized steel is protected, and the molten zinc solution can be easily and evenly covered in any corner where it is difficult to enter. The hardness value of the galvanized layer is larger than that of the steel, and the impact resistance and the abrasion resistance are quite good. The coating is very slow to consume in the atmosphere, and the life of the coating is much longer than other coatings, so the coating will not fall off easily and can be well adapted in different environments. Hot dip galvanized has a smooth appearance, is beautiful and artistic, and is more beautiful than ordinary steel, and construction is easy.