What are the advantages of hot dip galvanizing produced by a good manufacturer?

    hot dip galvanizing  is a very efficient way of metal corrosion, commonly used in each big metal device, compared with other anti-corrosion products, a good manufacturer to produce hot dip galvanized what are the advantages?

    1. Wide coverage, the whole equipment can be well protected. For example, some parts of steel are uneven, even difficult to reach the corner, hot dip galvanized can be well covered, to achieve full protection.

    2. High hardness value. Lower level of hot dip galvanized hardness value can reach 179 or 211 DPN, and steel hardness value is only about 159 DPN, so good quality hot dip galvanized metal can be have a very good protection effect, under intense collision, metal not easily collapse or cracks, and so on.

    The corners are better protected. Inside with the shape of the metal material, hot dip galvanized has a good character is, the more the easier it is to form a protective layer in edge area, and the protective layer compared with other material is thicker coating. For metal materials, the corner area is often the most vulnerable part, and this quality hot dip galvanized layer can better protect the corner area.

    4. Sacrifice anode protection metal. In the course of everyday use, unavoidably will be affected by different degree of loss, metal material in large impact, some parts of the metal material of the above hot dip galvanized layer will fall off, because of the impact and this time, hot dip galvanizing coating in the form of sacrificial anode, to protect the bare metal in the air, let it not be so fast by air corrosion rust, if it is other coating material, it is impossible to implement this practice, general metal exposed to the air immediately begin to rust.