hot galvanizing equipment correct processing time

To some understanding of the galvanizing production line is very small, so today we are going to share with you about galvanized production line how to correctly grasp the processing time, let's put the acid mist processing equipment, the problem such as galvanizing production line price, put down, take a look at "Solomon's hot galvanizing equipment is how to determine the processing time, hope you can know more in use process in the future. Now we're going to get down to business.

How does hot dip galvanizing equipment ensure a reasonable dip time?

If the zinc immersion time of hot-dip galvanizing equipment is too short, the surface zinc ferroalloy layer is not fully formed and the surface is not smooth. Over time, the thickness of the hot zinc layer will be too thick, resulting in unwarranted waste of zinc consumption and adhesion reduction.

Often down, said steel in the zinc bath immersion plating time is not sure, but usually we no longer have to zinc bath surface zinc ash is generated, usually between 0.5 to 2 minutes time, while relatively thick steel need longer zinc immersion time. Zinc dipping time don't need to have a fixed standard, but must according to the different thickness of the steel temperature, material, process factors such as comprehensive consideration, the other is in hot galvanizing equipment production experience is very important.

Through the introduction of this article, I believe you for "hot galvanizing equipment correct processing time" had certain understanding, if you want to know zinc trough, galvanizing production line, and other related knowledge, please contact with us!