Fluxing Tank Reprocessing & Regenerating system applications

Zinc-plated products are now very popular in the market because they have good corrosion resistance, better performance than ordinary metal and steel, and ideal for application. With galvanized products, reduce material loss and material purchase costs. The galvanization of the product is also required to be used in the Fluxing Tank Reprocessing & Regenerating system to ensure the quality of the galvanized product.

Do you understand the workflow of the Fluxing Tank Reprocessing & Regenerating system ?

There are many process steps for galvanizing products. First, the surface of the product should be inspected. The surface of the product should be free of contamination and there is no unevenness, which can be post-processed. If it is found that there is unevenness or pollution, it should be excluded and cannot be used for galvanizing. The next step is pickling and washing. It is prepared by adding hydrochloric acid and water in proportion. The product is put into the pickling tank for pickling operation. This removes dirt and impurities from the material and prepares for the following Fluxing Tank Reprocessing & Regenerating system   application. If the pickling is not good enough, the next operation may be affected, so the process of each step is required to be done well.

Fluxing Tank Reprocessing & Regenerating system can make products less susceptible to corrosion.

Ordinary metal products are susceptible to environmental factors and other factors, resulting in varying degrees of corrosion. Metal products are corroded, the structure will change, and it will not meet the needs of the operation, so this is useless, and new materials are needed, but these are also prone to problems. If you want to solve the corrosion problem of metal products, delay the corrosion of the products. Zinc plating is an effective metal anti-corrosion method, and the Fluxing Tank Reprocessing & Regenerating system will also be applied to ensure the quality effect of the product after galvanizing. How do I use the system? It should be carried out in accordance with the formal operation, and the professional operation is completed to ensure the safety of the system and the operators.