Will zinc slag appear in the operation of the zinc pot?

Hot dip galvanizing is a good metal anti-corrosion method. Many metal products used today are galvanized, which is better than the original to enhance corrosion resistance and wear resistance. . There are a lot of galvanized products. The heating pots commonly used in the industrial field are obtained by hot dip galvanizing. Finally, the galvanizing potcan be applied, which can operate normally.

The galvanizing pot ensures that the boiler is thermally stable.

Ordinary boilers are made of steel and metal. Metals are subject to different degrees of corrosion in different environments. The same is true for galvanized pots. For long periods of time, scales are generated inside the pots. Other impurities, scale and impurities increase, the heat transfer efficiency of the galvanizing pot is low, and more fuel should be used on the previous basis to ensure the heat transferability of the pot. Even if there is a chemical cleaning boiler, it may not be possible to restore the original state. If the life of the galvanizing pot is longer, the heat transfer efficiency of the galvanizing pot is improved, the boiler is galvanized, the galvanization can improve the corrosion resistance of the pot, the operation of the galvanizing pot delays corrosion, and the service life is increased.

The protective layer on the surface of the galvanizing pot will not fall off, so you can use it with confidence.

The current galvanizing process involves immersing the metal product in molten zinc, and the metal and zinc liquid react chemically to form a zinc alloy coating on the surface. Ordinary iron pans are more resistant to corrosion and wear after galvanizing, which is still required for heat transfer. The fuel is burned to heat the pot, and the heat of the galvanizing pot is transferred. The surface of the  galvanizing pot has a zinc alloy coating. Will there be any surface zinc coating peeling off during operation, and some zinc slag will be produced? You can use the galvanizing potwith confidence. The surface coating on this pot is not easy to fall off. If there is any peeling off, it means that the quality of galvanizing treatment is poor. Strictly adhering to the galvanizing process will also improve the quality of galvanized products.