What is good for pre-treatment (small parts) automatic roller pickling line

Hot dip galvanizing is a widely used metal anticorrosion method. It immerses metal products in molten zinc and chemically reacts with zinc to form zinc alloys, which can protect metal products and extend their service life. To galvanize the metal, it is necessary to first pickle it. It is necessary to use a Pretreatment (small parts) automatic roller pickling line to pickle the metal and then perform the following treatment.

Why do you pickle metal products?

The surface of the general metal product should be free of rust and impurities, and galvanization can ensure good results. If the rust impurities on the metal surface are not removed, the galvanization is affected, and finally the anti-corrosion effect is not ideal. The pickling is performed by proportioning the hydrochloric acid and water, and the metal product is immersed in the hydrochloric acid solution, and impurities and rust will fall off from the metal surface to restore the original metal surface. Pretreatment (small parts) automatic roller pickling line saves manpower, which is an automated pickling process that transfers from one program to another without the need for manpower, which in some ways saves resources.

Pretreatment (small parts) automatic roller pickling line production efficiency is higher than traditional equipment.

Automatic pickling of metal parts is better than manual pickling and improves efficiency. Such pickling line operation is reliable, and maintenance is also very convenient. If maintenance is required, the parts can be replaced without stopping the machine, and the production line will not be blocked due to problems in a certain link, which will affect production. The complete galvanizing process starts from the loading, including pickling, drying, passivation and other links. It is more efficient to set up a special pickling line for pickling of a large amount of metal. The acid is automatically completed by the pickling line. Wash the process and move on to the next step. Pretreatment (small parts) automatic roller pickling line is highly efficient, saving manpower and running safely.