How does hot galvanizing equipment control the amount of zinc slag?

The development of many industries in their daily life and is inseparable from the hot galvanizing equipment, sometimes a few small factors can lead to very big disparity, such as the premise of the hot galvanizing factory, today we will learn about the "hot galvanizing equipment how to control the zinc slag emissions".

In the process of galvanizing, some zinc slag will be produced in hot galvanizing equipment. If excessive, the zinc resource will be wasted. It is very necessary to know the problem. First of all, to deal with the problem of zinc slag, the first need is to control the temperature of zinc liquid and reduce the oxidation of zinc liquid surface, so as to reduce the production of slag.

We know that alloy products are needed in galvanizing process. The reason for this is that it not only ensures low conductivity, high melting point and low specific gravity, but also reduces the reaction with zinc solution to reduce heat loss.

The second is controlling the reaction. The reason for the occurrence of zn slag in the whole process is that zn solution is dissolved by zn because of the high ambient temperature, which leads to the poor fluidity of zn solution and the formation of zn fe alloy. Therefore, the long time accumulation will lead to zinc plating in zinc solution, so the zinc slag quantity control technique of zinc plating equipment should also control the production and processing temperature reasonably.

Above is our summary for everybody "hot galvanizing equipment zinc slag quantity how to control the" brief introduction of our company zinc and zinc pot, slot, and many other related products, if you are interested in, you can contact us for more details.